Users Guide
Routing Descriptor Blocks:
* 4.4.4.2, via GigabitEthernet 1/4 weight 100
* 6.6.6.2, via GigabitEthernet 1/16 weight 200
Dell(conf)#
Example (With
Weighted ECMP
Disabled)
Dell(conf)# ip route 1.1.1.0/24 6.6.6.2 weight 100
Dell(conf)# ip route 1.1.1.0/24 6.6.6.2 weight 200
Dell(conf)# do show ip route
Codes: C - connected, S - static, R - RIP,
B - BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated,
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default,
> - non-active route, + - summary route
Gateway of last resort is not set
Destination Gateway Dist/Metric Last Change
----------- ------- ----------- -----------
S 1.1.1.0/24 4.4.4.2, via Gi 1/4 1/0 00:00:01
6.6.6.2, via Gi 1/16
C 4.4.4.0/24 Direct, Gi 1/4 0/0 00:01:32
C 6.6.6.0/24 Direct, Gi 1/16 0/0 00:01:25
Dell(conf)#do show ip route 1.1.1.0/24
Routing entry for 1.1.1.0/24
Known via "static", distance 1, metric 0
Last update 00:05:01 ago
Routing Descriptor Blocks:
* 4.4.4.2, via GigabitEthernet 1/4
* 6.6.6.2, via GigabitEthernet 1/16
Dell(conf)#
show ip route list
Display IP routes in an IP prefix list.
Syntax
show ip route [vrf vrf-name] list prefix-list
Parameters
prefix-list
Enter the name of a configured prefix list.
vrf
vrf-name
Enter the keyword vrf followed by the name of the VRF to display IP routes in an IP
prefix list corresponding to that VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
676 IPv4 Routing