Users Guide
load-balance hg
Choose the traffic flow parameters the hash calculation uses while distributing the traffic across internal higig links.
Syntax
[no] load-balance hg {ip-selection | ipv6-selection [source-ip | source-ipv6 |
source-port-id | source-module-id | dest-ip | dest-ipv6 | dest-port-id | dest-
module-id | protocol | vlan | L4-source-port | L4-dest-port ] | mac [source-mac
| source-port-id | source-module-id | dest-mac | dest-port-id | dest-module-id
| vlan | ethertype | source-dest-mac ] | tunnel [ipv4-over-ipv4 | ipv4-over-
gre-ipv4 | mac-in-mac]}
Parameters
{{ip-selection|
ipv6-selection
[
source-ip
|
source-ipv6
|
source-port-id
|
source-module-id
|
dest-ip
|
dest-
ipv6
|
dest-port-id
|
dest-module-id
|
protocol
|
vlan
|
L4-source-port
|
L4-dest-port
]
To use IPv4 key fields in hash computation, enter the keyword ip-selection then one
of the parameters. To use IPv6 key fields in hash computation, enter the keyword ipv6-
selection then one of the parameters.
• source-ip — Use IPv4 src-ip field in hash calculation.
• source-ipv6 — Use IPv6 src-ip field in hash calculation
• source-port-id — Use src-port-id field in hash calculation.
• source-module-id — Use src-module-id field in hash calculation.
• dest-ip — Use IPv4 dest-ip field in hash calculation.
• dest-ipv6 — Use IPv6 dest-ip field in hash calculation
• dest-port-id — Use dest-port-id field in hash calculation.
• dest-module-id — Use dest-module-id field in hash calculation.
• protocol — Use IPv4 protocol field in hash calculation.
• vlan — Use vlan field in hash calculation.
• L4-source-port — Use IPv4 L4-source-port field in hash calculation.
• L4-dest-port — Use IPv4 L4-dest-port field in hash calculation.
mac [
source-mac
|
source-port-id
|
source-module-id
|
dest-mac
|
dest-
port-id
|
dest-
module-id
|
vlan
|
ethertype
|
source-dest-mac
]
To use MAC key fields in hash computation, enter the keyword mac then one of the
parameters:
• source-mac — Use source-mac field in hash calculation.
• source-port-id — Use src-port-id field in hash calculation.
• source-module-id — Use src-module-id field in hash calculation.
• dest-mac — Use dest-mac field in hash calculation.
• dest-port-id — Use dest-port-id field in hash calculation.
• dest-module-id — Use dest-module-id field in hash calculation.
• vlan — Use vlan field in hash calculation .
• ethertype — Use Ethertype field in hash calculation.
• source-dest-mac — Use SMAC and DMAC fields in hash calculation.
tunnel [
ipv4-over-
ipv4
|
ipv4-over-
gre-ipv4
|
mac-in-
mac
]}
To use tunnel key fields in hash computation, enter the keyword tunnel then one of the
parameters:
• ipv4-over-ipv4 — Use ipv4-over-ipv4 field in hash calculation.
• ipv4-over-gre-ipv4 — Use ipv4-over-gre-ipv4 field in hash calculation.
• mac-in-mac — Use mac-in-mac field in hash calculation.
Defaults IP selection 5-tuples (source-ip dest-ip vlan protocol L4-source-port L4-dest-port).
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
IPv4 Routing 657