Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

631

632

633

634

635

636

637

638

639

640

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

pre-6.2.1.1 Introduced on the E-Series.

debug arp

View information on ARP transactions.

Syntax

debug arp [interface] [count value]

To stop debugging ARP transactions, use the no debug arp command.

Parameters

interface

(OPTIONAL) Enter the following keywords and the interface information:

• For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the

slot/port information.

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then

the slot/port information.

• For the Management interface on the stack-unit, enter the keyword

ManagementEthernet then the slot/port information.

• For a port channel interface, enter the keywords port-channel then a number.

• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

count

value

(OPTIONAL) Enter the keyword count then the count value. The range is from 1 to

65534.

Defaults None

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.