Users Guide

Parameters
interface interface
Enter any of the following keywords and the interface information:
• For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the
slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
queue
Enter the keyword queue followed by all for displaying details of all queues, ucast
queue-id or all for displaying Unicast queue details, and mcast queue-id or all for
displaying Multicast queue details.
priority-group Enter the keyword priority-group followed by id for specific priority-group or
keyword all.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500.
Usage Information <Interface><slot/port>-Queue ucast/mcast — Displays the total unicast/multicast buffer usage on
per-port per-queue basis. For CPU port, counters for queues 0 to 11 displays and there is no differentiation
between unicast and multicast queues.
show hardware stack-unit buffer-stats-snapshot (Total
Buffer Information)
View the buffer statistics tracking resource information depending on the type of buffer information, such as device-level details, port-
level counters, queue-based snapshots, or priority group-level snapshot in the egress and ingress direction of traffic.
Syntax
show hardware stack-unit <id> buffer-stats-snapshot unit <id> resource x
Parameters
stack-unit stack-
unit-number
Unique ID of the stack unit to select a particular stack member and then enter one of the
following command options to display a collection of data based on the option entered.
buffer-stats-
snapshot unit
number
Display the historical snapshot of buffer statistical values unit Enter the keyword unit
along with a port-pipe number. The range is from 0 to 0.
buffer-info Buffer and traffic manager resources usage, where X can be one of the following:
• All - Displays ingress and egress device, port, and queue snapshots
• Interface all queue {all} - egress queue-level snapshot for both unicast and multicast
packets
• Interface all queue ucast {id | all} - egress queue-level snapshot for unicast packets
only
• Interface all queue mcast {id | all} - egress queue-level snapshot for multicast packets
only
• Interface all prio-group {id | all} - ingress priority-group level snapshot
Command Modes
EXEC
Debugging and Diagnostics 443