Users Guide

Term Explanation

Stack-Unit

Lists the stack unit or units that are checked. Entering all shows the status for all stacks.

Portpipe Lists the portpipe (port-set) or port pipes (port-sets) that are checked. Entering all

shows the status for stack-units and port-pipes in the chassis. The port set value is from

0 to 0.

CAM Partition Shows the CAM profile of the CAM.

Available CAM Identifies the amount of CAM space remaining for that profile.

Estimated CAM

per Port

Estimates the amount of CAM space the listed policy will require.

Status Indicates whether or not the policy will be allowed in the CAM.

Example

Dell# test cam-usage service-policy input In stack-unit all

----------------------------------------------------------------------------

1 | 0 | IPv4Flow | 102 | 0| Allowed

Dell#

Dell# test cam-usage service-policy input In stack-unit 1 port-set 0

-----------------------------------------------------------------------------

1 | 0 | IPv4Flow | 102 | 0| Allowed

Dell#

Content Addressable Memory (CAM) 417