Users Guide
Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series. Added support for the 4-byte format.
Usage Information
All the routers in the Confederation must be 4 byte or 2 byte identified routers. You cannot mix them.
The autonomous systems configured in this command are visible to the EBGP neighbors. Each autonomous
system is fully meshed and contains a few connections to other autonomous systems.
After specifying autonomous systems numbers for the BGP confederation, recycle the peers to update their
configuration.
Related
Commands
• bgp confederation identifier — configure a confederation ID.
• bgp four-octet-as-support — enable 4-byte support for the BGP process.
bgp connection-retry-timer
Configures the BGP connection retry timer.
Syntax
bgp connection-retry-timer retry-timer-value
To return to the default configuration, enter the no connection-retry-timer retry-timer-value
command.
Parameters
retry-timer-value
Enter a value that denotes the time interval after which the session retries the
connection. The valid range is from 10 to 65535.
Defaults 60 seconds.
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.4.(0.0) Introduced on the S4810.
bgp dampening
Enable BGP route dampening and configure the dampening parameters.
Syntax
bgp dampening [half-life reuse suppress max-suppress-time] [route-map map-name]
To disable route dampening, use the no bgp dampening [half-life reuse suppress max-
suppress-time] [route-map map-name] command.
Parameters
half-life
(OPTIONAL) Enter the number of minutes after which the Penalty is decreased. After the
router assigns a Penalty of 1024 to a route, the Penalty is decreased by half after the half-
life period expires. The range is from 1 to 45. The default is 15 minutes.
reuse
(OPTIONAL) Enter a number as the reuse value, which is compared to the flapping
route’s Penalty value. If the Penalty value is less than the reuse value, the flapping route is
Border Gateway Protocol 319