Users Guide

Parameters
group-name Specify the name of the ACL VLAN group. The name can contain a maximum 140
characters.
Default No default behavior or values
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3.(0.0) Introduced on the S4810, S4820T and Z9000 platforms
Usage Information
You can have up to eight different ACL VLAN groups at any given time. When you configure an ACL VLAN group,
you enter the ACL VLAN Group Configuration mode.
To avoid the problem of excessive consumption of CAM area, you can configure ACL VLAN groups that combines
all the VLANs that are applied with the same ACL in a single group. A unique identifier for each of ACL attached to
the VLAN is used as a handle or locator in the CAM area instead of the VLAN id. This method of processing
signficiantly reduces the number of entries in the CAM area and saves memory space in CAM.
You can create an ACL VLAN group and attach the ACL with the VLAN members. Optimization is applicable only
when you create an ACL VLAN group. If you apply an ACL separately on the VLAN interface, each ACL maps with
the VLAN and increased CAM space utilization occurs.
Attaching an ACL individually to VLAN interfaces is similar to the behavior of ACL-VLAN mapping storage in CAM
prior to the implementation of the ACL VLAN group functionality.
show acl-vlan-group detail
Display all the ACL VLAN Groups or display a specific ACL VLAN Group by name. To display the names in their entirety, the output
displays in a line-by-line format.
Syntax
show acl-vlan-group detail
Parameters
detail
Display information in a line-by-line format to display the names in their entirety.
Without the detail option, the output is displayed in a table style and information may be
truncated.
Default No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3.(0.0) Introduced on the S4810, S4820T, Z9000 and MXL platforms
Usage Information The output for this command displays in a line-by-line format. This allows the ACL-VLAN-Group names (or the
Access List Group Names) to display in their entirety.
294 Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)