Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

221

222

223

224

225

226

227

228

229

230

permit Enter the keyword permit to configure a filter to forward packets meeting this

condition.

any (OPTIONAL) Enter the keyword any to match any packets.

ip-prefix /nn

(OPTIONAL) Specify an IP prefix in the network/length format. For example, 35.0.0.0/8

means match the first 8 bits of address 35.0.0.0.

min-prefix-

length

(OPTIONAL) Enter the keyword ge and then enter the minimum prefix length, which is a

number from zero (0) to 32.

max-prefix-

length

(OPTIONAL) Enter the keyword le and then enter the maximum prefix length, which is a

number from zero (0) to 32.

bitmask

number

Enter the keyword bitmask then enter a bit mask number in dotted decimal format.

Defaults Not configured.

Command Modes PREFIX-LIST

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.3.1.0 Added the bit mask option.

Usage Information

If you do not use the ge or le options, only packets with an exact match to the prefix are filtered.

show config

Display the current PREFIX-LIST configurations.

Syntax