Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

211

212

213

214

215

216

217

218

219

220

Defaults Not enabled.

Command Modes CONFIGURATION-MAC ACCESS LIST-STANDARD

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

7.4.1.0 Added the monitor option.

Usage Information

When you use the log option, the CP processor logs detail the packets that match. Depending on how many

packets match the log entry and at what rate, the CP may become busy as it has to log these packets’ details.

NOTE: When you configure ACL logging and byte counters simultaneously, byte counters may

display an incorrect value. Configure packet counters with logging instead.

Commands

• permit — configures a MAC address filter to pass packets.

• seq — configures a MAC address filter with a specified sequence number.

mac access-list standard

To configure a standard MAC ACL, name a new or existing MAC access control list (MAC ACL) and enter MAC ACCESS LIST mode. Also

refer to the Commands Common to all ACL Types section and the Common MAC Access List Commands section.

Syntax

mac access-list standard mac-list-name

To delete a MAC access list, use the no mac access-list standard mac-list-name command.

Parameters

mac-list-name

Enter a text string as the name of the standard MAC access list (140 character

maximum).

Defaults Not configured.

Command Modes CONFIGURATION