Users Guide

domain [ name |
level ]
Enter the keyword domain and then enter the domain name or domain level.
ma-name name Enter the keyword ma-name and then enter the name of the maintenance association.
mepid mep-id Enter an MEP ID. The range is from 1 to 8191.
Defaults None
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the S-Series.
ethernet cfm mip
Create a maintenance intermediate point (MIP).
Syntax
ethernet cfm mip domain {name | level} ma-name name
Parameters
domain [ name |
level ]
Enter the keyword domain then the domain name or domain level.
ma-name name Enter the keyword ma-name then the name of the maintenance association.
Defaults None
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the S-Series.
mep cross-check
Enable cross-checking for a MEP.
Syntax
mep cross-check mep-id
146 802.1ag