Users Guide

Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information This command enables the device to transmit its VLT peer MAC address along with its own MAC address to the
remote VLT domain. By default, a node sends only its own MAC address to the remote VLT domain.
This configuration is applicable only for an LLDP proxy gateway. A typical use example is a square VLT topology
with single link connecting to the remote peers.
Example
Dell(conf-vlt-domain-proxy-gw-lldp)# vlt-peer-mac transmit
show vlt-proxy-gateway
Displays the VLT proxy gateway configuration.
Syntax
show vlt-proxy-gateway [info] {lldp | static}
Parameters
lldp Enter the keyword lldp to display details about the LLDP VLT proxy gateway
configuration.
static Enter the keyword static to display details about the static VLT proxy gateway
configuration.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information
The proxy-gateway feature may go operationally down for any of the following reasons:
• LLDP is globally disabled.
• LDP is disabled per port.
• VLT port-channel is down.
• LLDP neighbor is down.
If any of these conditions is true, the proxy-gateway feature could be operationally down. If so, it is shown in the
show command output.
VLT Proxy Gateway 1407