Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

1401

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.

Usage Information You can configure the MAC address of a VLT peer in a remote VLT domain to associate with the static VLT proxy

gateway and exclude a VLAN, or a range of VLANs, from proxy routing.

Example

Dell(conf)# vlt-domain 1

Dell(conf-vlt-domain#proxy-gateway static

Dell(conf-vlt-domain-proxy-gw-static)# remote-mac-address 00:01:e8:06:95:ac

exclude-vlan 3

Dell(conf-vlt-domain-proxy-gw-static)#

peer-domain-link port-channel exclude-vlan

Configure the VLT port channel, which is connected to the remote VLT domain, for the proxy gateway or configure the VLANs you want

to exclude from VLT proxy gateway.

Syntax

[no] peer-domain-link port-channel interface-identifier exclude-vlan vlan-range

Parameters

port-channel Configure the proxy-gateway interface port-channel.

interface-

identifier

Enter the interface type.

vlan-range

Enter the VLAN IDs that you want to exclude from the proxy gateway. The value can be a

single VLAN ID, comma-separated VLAN IDs, a range of VLAN IDs, or a combination. For

example:

Comma-separated: 3, 4, 6

Range: 5-10

Combination: 3, 4, 5-10, 8

Command Modes VLT DOMAIN PROXY GW LLDP

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.