Users Guide

Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.4(0.0) Introduced on the S–Series.
Usage Information
If you do not specify the maximum route limit for a VRF, the VRF has unlimited space that extends to the
maximum number of entries allowed for the system.
show ip vrf
Displays information corresponding to the VRFs that you configure in the system.
Syntax
show ip [vrf vrf-name]
Parameters
vrf vrf-name Enter the keyword vrf then the name of the VRF to display information corresponding to
that VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.4.(0.0) Introduced on the S-Series and Z9000.
Example
Dell# show ip vrf
VRF-Name VRF-ID Interfaces
fault 0 Gi 1/1-13,18-47,
Te 1/49,50,51,52,
Ma 1/1,
Ma 2/1,
Ma 3/1,
Ma 4/1,
Ma 5/1,
Ma 6/1,
Nu 0,
Vl 1
test1 1 Gi 1/14,16-17
test2 2 Gi 1/15
management 64
Virtual Routing and Forwarding (VRF) 1401