Users Guide

ipv6 route-import
Imports IPv6 routes that another VRF leaks using the tag that VRF specifies during export of these routes.
Syntax
ipv6 route-import tag [route-map-name]
Parameters
route-import Enter the keywords route-import to import IPv6 routes into the VRF.
tag Enter a tag (ASN number) to specify an import route target for importing routes from
another VRF. To import leaked routes from another VRF, use the same ASN number that
is specified as the export route target at the source VRF.
route-map-name Enter the name of the route-map to filter the imported routes.
NOTE: Use the route-map attribute while importing routes from the global
RTM. Route-maps allow you to filter routes at the import end based on the
matching criteria that you define in the route-map.
Defaults N/A
Command Modes
• VRF mode
• CONFIGURATION mode
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.
Usage Information
It is possible to configure multiple import conditions per VRF depending on the exporting VRF.
The export-target and import-target support only the match the protocol and prefix-list options. Other options
that you configure in the route-maps are ignored.
Related
Commands
• ipv6 route-export — exports IPv6 routes to another VRF.
match source-protocol
Specify matching source-protocol criteria while exporting or importing routes.
Syntax
match source-protocol {bgp | isis | ospf | connected | static}
Parameters
bgp Enter the keyword bgp to leak or share routes corresponding to the BGP protocol.
isis Enter the keyword isis to leak or share routes corresponding to the ISIS protocol.
ospf Enter the keyword ospf to leak or share routes corresponding to the OSPF protocol.
connected Enter the keyword connected to leak or share connected routes corresponding to the
VRF.
static Enter the keyword static to leak or share static routes corresponding to the VRF.
Command Modes ROUTE MAP MODE
1398 Virtual Routing and Forwarding (VRF)