Users Guide

stack-unit provision
Preconfigure a logical stacking ID of a switch that joins the stack. This is an optional command that is executed on the management unit.
Syntax
stack-unit [stack-number] provision {model-identifier}
Parameters
stack-number Enter a stack member identifier of the switch that you want to add to the stack.
model-identifier Enter the model identifier of the switch to be added as a stack member. This identifier is
also referred to as the provision type.
Defaults When this value is not set, a switch joining the stack is given the next available sequential stack member identifier.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Related
Commands
• reload – reboot the Dell Networking OS.
• show system (S-Series and Z-Series) – display the status of all stack members or a specific member.
upgrade system stack-unit
Copy the boot image or Dell Networking OS from the management unit to one or more stack members.
Syntax
upgrade {boot | system} stack-unit {all | stack-unit-number | A | B}
Parameters
boot Enter the keyword boot to copy the boot image from the management unit to the
designated stack members.
system Enter the keyword system to copy the Dell Networking OS image from the management
unit to the designated stack members.
stack-unit Enter the stack-unit number. The range is from 1 to 12.
all Enter the keyword all to copy the designated image to all stack members.
A Enter the keyword A to upgrade all stacked units in System A ( only).
B Enter the keyword B to upgrade all stacked units in System B ( only).
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Increased the stacking range to 12 units in S3100 series.
1324 Stacking