Users Guide

show config
Display the current configuration for the mode. Only non-default values display.
Syntax
show config
Command Modes SPANNING TREE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Example
Dell(config-stp)# show config
protocol spanning-tree 0
no disable
Dell(config-stp)#
show spanning-tree 0
Display the spanning tree group configuration and status of interfaces in the spanning tree group.
Syntax
show spanning-tree 0 [active | brief | guard | interface interface | root |
summary]
Parameters
0 Enter 0 (zero) to display information about that specific spanning tree group.
active (OPTIONAL) Enter the keyword active to display only active interfaces in spanning tree
group 0.
brief (OPTIONAL) Enter the keyword brief to display a synopsis of the spanning tree group
configuration information.
guard (OPTIONAL) Enter the keyword guard to display the type of guard enabled on an STP
interface and the current port state.
interface interface (OPTIONAL) Enter the keyword interface and the type slot/port of the interface you
want displayed. Type slot/port options are the following:
• For a port-channel interface, enter the keywords port-channel then the port-
channel ID.
Spanning Tree Protocol (STP) 1311