Users Guide
0x00000132 420 42 10000 0.20% 0.10% 0.13% 0 vrrp
0x0000028d 410 41 10000 0.20% 0.05% 0.12% 0 ovsdbsvr
0x000000a9 200 20 10000 0.20% 0.03% 0.06% 0 arpm
0x00000253 100 10 10000 0.20% 0.02% 0.02% 0 otm
0x00000206 140 14 10000 0.20% 0.02% 0.03% 0 tnlmgr
0x00000012 1290 129 10000 0.00% 0.10% 0.12% 0 mount_mfs
0x0000024d 40 40 10000 0.00% 0.08% 0.14% 0 xstp
Dell#
Related
Commands
• show hardware layer2 acl — displays Layer 2 ACL data for the selected stack member and stack member
port-pipe.
• show hardware layer3 — displays Layer 3 ACL or QoS data for the selected stack member and stack member
port-pipe.
• show hardware stack-unit — displays the data plane or management plane input and output statistics of the
designated component of the designated stack member.
• show hardware system-flow — displays Layer 3 ACL or QoS data for the selected stack member and stack
member port-pipe.
• show interfaces stack-unit — displays information on all interfaces on a specific S-Series stack member.
• show processes memory (S-Series) — displays CPU usage information based on processes running in an S-
Series.
show processes ipc flow-control
Display the single window protocol queue (SWPQ) statistics.
Syntax
show processes ipc flow-control [cp]
Parameters
cp (OPTIONAL) Enter the keyword cp to view the control processor’s SWPQ statistics.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
Control and Monitoring 123