Users Guide

NOTE: If you enable FIPS mode, you can only select version 2.
Defaults
• Default listening port is 22.
• Default cipher list is 3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc,aes128-ctr,aes192-ctr,aes256-ctr.
• When FIPS is enabled, the default is hmac-sha1-96.
• When FIPS is not enabled, the default is hmac-md5,hmac-md5-96,hmac-sha1,hmac-sha1-96,hmac-sha2-256.
• When FIPS is enabled, the default is diffie-hellman-group14-sha1.
• When FIPS is not enabled, the default is diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1,diffie-
hellman-group14-sha1.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Removed the support for hmac-sha2-256-96 algorithm.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.1) Introduced the cipher , kex and mac options on the Z9500.
9.5(0.0) Introduced the cipher, kex and mac options on the Z9000, S6000, S4820T, S4810,
and MXL.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information This command enables the SSH server and begins listening on a port. If a port is not specified, listening is on SSH
default port 22.
NOTE: Starting with Dell Networking OS Release 9.2(0.0), SSH server is enabled by default.
Example
Dell# conf
Dell(conf)# ip ssh server port 45
Dell(conf)# ip ssh server enable
Dell#
Related
Commands
show ip ssh
1220 Security