Users Guide

The following is sample output of the show login statistics unsuccessful-attempts user
login-id command.
Dell# show login statistics unsuccessful-attempts user admin
There were 3 unsuccessful login attempt(s) for user admin in last 12 day(s).
The following is sample output of the show login statistics successful-attempts command.
Dell#show login statistics successful-attempts
There were 4 successful login attempt(s) for user admin in last 30 day(s).
Related
Commands
• login statistics — enable and configure user login statistics on console and virtual terminal lines.
• login concurrent-session — configures the limit of concurrent sessions for all users on console and virtual
terminal lines.
show memory
View current memory usage on the switch.
Syntax
show memory [stack-unit id]
Parameters
stack-unit id (OPTIONAL) Enter the keyword stack-unit then the stack unit ID to display memory
information on the designated stack member.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced this version of the command for the S-Series.
Usage Information The output for show memory displays the memory usage of LP part (sysdlp) of the system. The sysdlp is an
aggregate task that handles all the tasks running on the S-Series’ CPU.
Example
Dell#show memory stack-unit 1
Statistics On Unit 1 Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
3177185280 2310248 3174875032 3174676264 3174875032
Dell#
120 Control and Monitoring