Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

1121

Parameters

process-id

Enter a number that corresponds to the OSPF process ID to redistribute. The range is

from 1 to 65355.

match external {1 |

(OPTIONAL) Enter the keywords match external then the numbers 1 or 2 to

indicated that external 1 routes or external 2 routes should be redistributed.

match internal (OPTIONAL) Enter the keywords match internal to indicate that internal routes

should be redistributed.

metric

metric-

value

(OPTIONAL) Enter the keyword metric then a number as the metric value. The range is

from 0 to 16.

route-map

map-

name

(OPTIONAL) Enter the keywords route-map then the name of a configured route map.

Defaults Not configured.

Command Modes ROUTER RIP

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series.

7.6.1.0 Introduced on the C-Series.

pre- 6.2.1.1 Introduced on the E-Series.

router rip

To configure and enable RIP, enter ROUTER RIP mode.

Syntax

router rip

To disable RIP, use the no router rip command.

Defaults Disabled.

Command Modes CONFIGURATION