Users Guide

To remove the output policy map from the interface, use the no service-policy output policy-map-
name command.
Parameters
policy-map-name Enter the name for the policy map in character format (32 characters maximum). You can
identify an existing policy map or name one that does not yet exist.
Defaults none
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the C-Series and S-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information A single policy-map can be attached to one or more interfaces to specify the service-policy for those interfaces. A
policy map attached to an interface can be modified.
Related
Commands
• policy-map-output — creates an output policy map.
service-queue
Assign a class map and QoS policy to different queues.
Syntax
service-queue queue-id [class-map class-map-name] [qos-policy qos-policy-name]
To remove the queue assignment, use the no service-queue queue-id [class-map class-map-
name] [qos-policy qos-policy-name] command.
Parameters
queue-id Enter the value used to identify a queue. The range is from 0 to 7.
class-map class-
map-name
(OPTIONAL) Enter the keyword class-map then the class map name assigned to the
queue in character format (32 character maximum).
NOTE: This option is available under policy-map-input only.
qos-policy qos-
policy-name
(OPTIONAL) Enter the keywords qos-policy then the QoS policy name assigned to
the queue in text format (32 characters maximum). This specifies the input QoS policy
assigned to the queue under policy-map-input and output QoS policy under
policy-map-output context.
Defaults none
Command Modes CONFIGURATION (conf-policy-map-in and conf-policy-map-out)
1086 Quality of Service (QoS)