Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

1061

Version Description

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.2.1.1 Introduced.

Commands

• vlan bridge-priority — sets the bridge-priority value.

• vlan hello-time — changes the time interval between BPDUs.

• vlan max-age — changes the time interval before PVST+ refreshes.

• show spanning-tree pvst — displays the PVST+ configuration.

vlan hello-time

Set the time interval between generation of PVST+ 7 BPDUs.

Syntax

vlan vlan-range hello-time seconds

To return to the default value, use the no vlan hello-time command.

Parameters

vlan

vlan-range

Enter the keyword vlan then the VLAN numbers. The range is from 1 to 4094.

hello-time

seconds

Enter the keywords hello-time then the time interval, in seconds, between

transmission of BPDUs. The range is from 1 to 10 seconds. The default is 2 seconds.

Defaults 2 seconds

Command Modes CONFIGURATION (conf-pvst)

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.