Deployment Guide

97
set openflow <subcommand>
Displays available subcommands for global OpenFlow settings.
Example
FJ6K0Z1_console> set openflow
set openflow <subcommand>
possible subcommands:
backup set openflow controller backup IP address and port
connection set openflow controller connection type <tcp or tls>
name set openflow controller name
primary set openflow controller primary IP address and port
priority set openflow controller priority
state set openflow controller state
In the switch configuration:
"Global OpenFlow Configuration":
{
"DNOS-OF version": "1.1",
"OFControlNetwork Backup Address": "192.168.1.181/24",
"OFControlNetwork Primary Address": "192.168.0.181/24",
"OpenFlow DataPath ID": "0x0000000000000181",
"OpenFlow Mirror-Packet Cookie": "0xC823000000000000",
"OpenFlow Packet-In Cookie": "0x0",
"OpenFlow protocol version": "OpenFlow 1.3.4",
"Periodic Echo Interval [sec]": 3,
"Reset Echo Count": 3,
"table processing mode": "singletable"
}
set openflow backup <subcommand>
Displays the available subcommands for set openflow backup.
Example
FJ6K0Z1_console> set openflow backup
set openflow backup <subcommand>
possible subcommands:
control set system openflow backup control settings
set openflow backup control <subcommand>
Displays the available subcommands for set openflow backup control.
Example
FJ6K0Z1_console> set openflow backup control
set openflow backup control <subcommand>
possible subcommands:
port set the backup OpenFlow control ports network IP address