Deployment Guide

95
set ip gateway command
Use to set the default IP gateway on the management port and store this information to the switch
configuration.
Example
FJ6K0Z1_console> set ip gateway
set ip gateway <gateway address>
Set the default_gateway for the management port.
set ip ssh server command
Use to enable the ssh server on the management port and store that state to the switch configuration.
Example
FJ6K0Z1_console> set ip ssh ?
set ip ssh <subcommand>
possible subcommands:
server enable the ssh server on the management port
set ip syslog service command
Use to enable the syslog service on the management port and store that state to the switch configuration.
Example
FJ6K0Z1_console> set ip syslog service ?
set ip syslog service <ip address> <port>
Set the address and port for remote syslog from the management port. The port
is optional and will default to 514.
set ip telnet server command
Used to enable the telnet service on the management port and store that state to the switch
configuration.
Example
FJ6K0Z1_console> set ip telnet server
set ip telnet server
Enable the IP telnet server on the management port.
set logging <subcommand>
Use to enable the telnet service on the management port and store that state to the switch configuration.
Example
FJ6K0Z1_console> set logging
set logging <subcommand>
possible subcommands:
component set component for logging
level