Deployment Guide

91
no power <subcommand>
no power lists the available no power subcommands.
Example
JFTP0Z1_console# no power
no power <subcommand>
possible subcommands:
high no power high (disable high power mode)
inline Disable PoE feature on switch
management no power management (set power management to default mode)
priority Disable inline power priority of a port and set to defaults
threshold Disable PoE power threshold checking and set to defaults
no power high command
Disable high power mode.
Example
FJ6K0Z1_console> no power high
PoE high power mode disabled
Power management mode set to default dynamic
no power inline command
Disable the PoE feature on the switch.
Example
FJ6K0Z1_console> no power inline
PoE feature disabled
no power management command
Set power management to default mode.
Example
FJ6K0Z1_console> no power management
Power management mode set to default mode
no power priority command
Disable inline power priority of a port and set to defaults.
Example
FJ6K0Z1_console> no power priority
Power management mode set to default mode
no power threshold command
Disable PoE power threshold checking and set to defaults.
Example
FJ6K0Z1_console> no power threshold
power threshold set to default (90)