Deployment Guide

89
no top level command
Displays the available subcommands for the no command.
Example
JFTP0Z1_console# no
no <subcommand>
possible subcommands:
ip clear system ip settings
openflow clear system openflow settings
password remove the password for remote ssessions
power no power subcommands
password disable vlan-gate for a port
no ip <subcommand>
no ip lists available subcommands.
Example
JFTP0Z1_console# no ip
no ip <subcommand>
possible subcommands:
address
dhcp disable the management port dhcp client
gateway remove the default gateway from the management port
ssh clear system ip ssh settings
syslog clear system ip syslog settings
telnet clear system ip telnet settings
no ip address command
no ip address removes the static IP address from the management interface.
Example
JFTP0Z1_console# no ip address
no ip address
Delete ip address from management interface
no ip dhcp command
This command shuts down the DHCP client on the switch and disables it in the running configuration.
Use the set ip dhcp command to enable it.
Example
FJ6K0Z1_console> no ip dhcp
no ip dhcp
Disable the management port dhcp client.
no ip gateway command
This command removes the default gateway from the management port.
Example
FJ6K0Z1_console> no ip gateway
no ip gateway
Remove the default gateway from the management port.
no ip ssh server command
This command disables the SSH server on the management port.
Example
FJ6K0Z1_console> no ip ssh
no ip ssh <subcommand>
possible subcommands:
server disable the ssh server on the management port