Deployment Guide

80
A.1 Commands
boot top level command
The boot top level command shows what subcommands are available.
Example
JFTP0Z1_console# boot
boot <subcommand>
possible subcommands:
system select system partition to boot
boot system <subcommand>
Use the boot system command to specify the system image that the switch loads at bootup.
Syntax
boot system <image to boot>
boot system backup or boot system active
User Guidelines
Use the show bootvar or show version commands to find out which images are in the active and backup
partitions.
Example
boot system <active>
Tells switch to load from image in active partition
boot system <backup>
Tells switch to load from image in backup partition
clear top level command
The clear top level command shows what subcommands are available.
Example
JFTP0Z1_console# clear
clear <subcommand>
possible subcommands:
counters clear all interface statistics counters
openflow clear openflow data structures
power clear openflow data structures
clear counters command
Use the clear counters command to clear all interface statistics counters.
Example
JFTP0Z1_console# clear counters
This operation may take a few minutes. The console prompt will return when the operation
is complete
Port Stats cleared