Deployment Guide

76
},
"level": 1
},
"Global OpenFlow Configuration":
{
"DNOS-OF version": "1.1",
"HA feature": "enabled",
"OFControlNetwork Backup Address": "192.168.1.55/24",
"OFControlNetwork Primary Address": "192.168.0.55/24",
"OpenFlow protocol version": "OpenFlow 1.3.4",
"connection max retries": 3,
"connection retry interval [sec]": 500,
"echo timeout [sec]": 5,
"failover delay time [sec]": 4,
"max failover time [sec]": 17,
"periodic echo interval [sec]": 3,
"reset echo count": 3,
"table processing mode": "singletable"
},
"Management Interface":
{
"dhcp": true,
"ip address": "",
"ip gateway": ""
},
"OpenFlow Controller0":
{
"backup ip address": "192.168.1.3",
"backup tcp port": 6633,
"connection type": "tcp",
"name": "nec",
"primary ip address": "192.168.0.3",
"primary tcp port": 6633,
"priority": 0,
"state": "enabled"
},
"Password Hash": "dWAj3KHZgdo",
"Remote Syslog Service":
{
"enabled": false,
"ip address": "",
"ip port": 514
},
"SSH Service":
{
"enabled": false
},
"Telnet Service":
{
"enabled": true
}
}
5.7.3 backup-config
The switch configuration can be saved off and also stored in flash, in a file called backup-config. This can be
done using the “copy” command as shown below, and displayed using the show backup-config command.
FJ6K0Z1_console# copy running-config backup-config
FJ6K0Z1_console> show backup-config
{