Deployment Guide

135
system clock <subcommand>
Shows subcommands allowing the user to configure current system time and date.
Example
FJ6K0Z1_console> system clock
Incomplete command!
possible subcommands:
date set the system date
time set the system time
system clock date command
Allows the user to configure current system date.
Example
FJ6K0Z1_console> system clock date
Error: Missing or invalid arguments!
Usage:
system clock date <year> <month> <day>
Set the system date. Arguments must be in numeric form.
system clock time command
Allows the user to configure current system time.
Example
FJ6K0Z1_console> system clock time
Error: Missing or invalid arguments!
Usage:
system clock time <hours:miutes:seconds>
Set the system time. Argument is in HH:MM:SS format. Hours should be expressed
in 24 hour notation. Seconds are optional.
system locate command
Starts a beacon timer running for the specified number of seconds to allow the system to be located in the
racks.
Example
FJ6K0Z1_console> system locate
system locate <time in seconds (1-300)>
Activate's the switch's blinking locate LED function for the alloted amount
of time. This can assist a user in locating the switch among other hardware.
FJ6K0Z1_console> system locate 30