Deployment Guide

133
show system command
Lists out information showing the state of the system
Example
FJ6K0Z1_console> show system
System Description: Dell Networking N3024P
Burned in MAC Address: f8:b1:56:67:99:91
System Model ID: N3024P
Machine Type: Dell Networking N3024P
Serial Number: CN0C3M5M282984CE0129A02
Service Tag: FJ6K0Z1
Asset Tag: 12345
System Thermal Conditions:
Unit Temperature State
(Celsius)
---- ----------- -----
0 32 OK
Temperature Sensors:
Unit Description Temperature
(Celsius)
---- ----------- -----------
0 MAC 32
0 PHY 32
Fans:
Unit Description Status
---- ----------- ------
0 Fan-1 OK
0 Fan-2 OK
Power supplies:
Unit Description Status Average Current Since
Power Power (seconds ago)
(Watts) (Watts)
---- ----------- ------ ------- ------- ---------
0 System OK 28 28 248837
0 System Failed 0 0 0
USB Port Power Status:
----------------------
USB is Enabled and status is OK
show tech-support command
Lists out information showing the state of the system. This is a very comprehensive dump of everything
listed here under the “show’ commands along with internal debugging information and other information
about the system.
Example
FJ6K0Z1_console> show tech-support
<dump of system begins>
.
.
.
<dump of system ends>