Deployment Guide

115
show openflow top level command
Displays the show commands available for OpenFlow
Example
FJ6K0Z1_console> show openflow
possible subcommands:
config show OpenFlow configuration
flow show system openflow flow information
flows show OpenFlow flow table entries
group show system openflow group information
groups show OpenFlow group table entries
port show openflow port information
queue show openflow queue information
statistics show all OpenFlow statistics
tables show all OpenFlow table information
show openflow config command
Shows information about the openflow configuration and processes, as well as information about the
OpenFlow controller interfaces active in DNOS-OF.
Example
OpenFlow Configuration
----------------------
DNOS-OF Version : 1.1
OpenFlow Protocol Version : OpenFlow 1.3.4
System Model ID : N3024P
System Serial Number : CN0C3M5M282984CN0208A02
System MAC Address : f8:b1:56:69:dd:1b
Table Processing Mode : Single Table
HA features : Enabled
Connection Retry Interval (seconds) : 500
Connection Max Retries : 3
Connection Echo Interval (seconds) : 3
Connection Echo Timeout (seconds) : 5
Connection Reset Echo Count : 3
Connection Failover Delay Time : 4
Connection Max Failover Time : 17
OpenFlow Datapath ID : 30637769011704
OpenFlow Datapath Description : DNOS-OF 1.1: N3024P(4TBK0Z1)
OpenFlow Control Network Primary : 192.168.0.10/24
OpenFlow Control Network Backup : 192.168.0.10/24
PID : 965
Failure Mode : SECURE
Flow Misses : CONTROLLER
Flow Tables Synopsis
--------------------
Ingress Flow Table (0)
Current Number of Flows: 0
Max Number of Flows: 2000
VLAN Flow Table (10)
Current Number of Flows: 0
Max Number of Flows: 12288
Termination MAC Flow Table (20)
Current Number of Flows: 0
Max Number of Flows: 512
Unicast Routing Flow Table (30)
Current Number of Flows: 0
Max Number of Flows: 40960