Deployment Guide

112
show interfaces status command
Shows the interfaces status information.
Example
FJ6K0Z1_console> show interfaces status
Show interfaces status Show status information for all available interfaces.
FJ6K0Z1_console> show interfaces status
Port Duplex Speed Neg Link Flow Ctrl
---- ------ ----- ------ ---- ---------
1 half 0 auto down
2 half 0 auto down
3 half 0 auto down
4 half 0 auto down
5 half 0 auto down
6 half 0 auto down
7 half 0 auto down
8 half 0 auto down
9 half 0 auto down
10 half 0 auto down
11 half 0 auto down
12 half 0 auto down
13 half 0 auto down
14 half 0 auto down
15 half 0 auto down
16 half 0 auto down
17 half 0 auto down
18 half 0 auto down
19 half 0 auto down
20 half 0 auto down
21 half 0 auto down
22 half 0 auto down
23 full 1000 auto down
24 full 1000 auto down
50 full 10000 noauto down
51 full 10000 noauto down
show interfaces switchport command
Shows the switchport information.
Example
FJ6K0Z1_console> show interfaces switchport
show interfaces switchport <port number>
Shows the operational status of an interface by port number.
FJ6K0Z1_console> show interfaces switchport 1
Port 1 is down, MTU 16356 bytes, Half-duplex, 0 Mb/s
L2 Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt
Received: 0 broadcasts, 0 multicasts, 0 unicasts
0 packets input, 0 bytes, 0 drops
0 jabbers, 0 runts, 0 giants, 0 alignments
0 MAC Errors, 0 FCS, 0 overrun, 0 not forwarded
Transmitted: 0 broadcasts, 0 multicasts, 0 unicasts
0 packets output, 0 bytes, 0 discards
0 output_errors, 0 collisions
0 multiple collisions, 0 excessive collisions