Deployment Guide

109
"connection max retries": 0,
"connection retry interval": 2000,
"enabled": true,
"ip address": "198.18.3.201",
"ip port": 6633,
"periodic echo ms": 10000,
"priority": 0,
"protocol version": "OpenFlow 1.3.4",
"reset echo count": 3,
"tls": false
},
"Password Hash": "dWAj3KHZgdo",
"Remote Syslog":
{
"enabled": true,
"ip address": "172.25.2.51",
"ip port": 514
},
"SSH Service":
{
"enabled": true
},
"Telnet Service":
{
"enabled": true
}
}
show bootvar command
Displays the environment variables that the system is set up to use in the boot loader when it starts up.
Note that similar information can be retrieved from the “show version” platform CLI command.
Example
FJ6K0Z1_console> show bootvar
Images currently available in Flash
unit active backup current-active next-active
---- ----------- ----------- -------------- --------------
1 8.10.2.0 6.1.0.6 8.10.2.0 8.10.2.0
show clock command
Shows the current time and date on the system.
Example
FJ6K0Z1_console> show clock
Sat Aug 15 01:53:33 2015
show crypto key command
Prints the SSH server encryption key. Note that the “crypto key generate” command allows this key to be
created, while the “crypto key zeroize” command clears it.
Example
FJ6K0Z1_console> show crypto ?
show crypto <subcommand>
possible subcommands:
key print the ssh server encryption keys
FJ6K0Z1_console> show crypto key