Deployment Guide

105
set power <subcommand>
Displays the available set power PoE subcommands.
Example
FJ6K0Z1_console> set power
set power <subcommand>
possible subcommands:
high Set PoE inline power to high power mode
inline Enable PoE feature on the switch
management Set power management to the indicated mode
priority Set power inline priority to the indicated priority
reset Reset PoE on specified port (useful for ports in error state)
threshold Sets threshold power point when ports are disconnected from PoE
set power high command
Use the set power high command to set the PoE inline power on a given port to high power mode.
Example
FJ6K0Z1_console> set power high <port to set high power mode on>
FJ6K0Z1_console> set power high 1
PoE power mode set to high power
set power inline command
Use the set power inline command to enable the PoE feature on the switch. Use the no power inline
command to disable the PoE feature on the switch.
Example
FJ6K0Z1_console> set power inline
PoE feature enabled
set power management <subcommand>
Displays the available set power management PoE subcommands to set power management to the
indicated mode.
Example
FJ6K0Z1_console> set power management
set power management <subcommand>
possible subcommands:
class Set power management mode to class mode
dynamic Set power management mode to dynamic mode
static Set power management mode to static mode
set power management class command
Use the set power management class command to set the PoE power management mode to class mode.
Example
FJ6K0Z1_console> set power management class
PoE power management mode set to class