Deployment Guide

87
show tech-support command
Lists out information showing the state of the system. This is a very comprehensive dump of everything
listed here under the “show’ commands along with internal debugging information and other information
about the system.
Examples
FJ6K0Z1_console> show tech-support
<dump of system begins>
.
.
.
<dump of system ends>
show version command
Displays the versions of firmware on the switch.
Examples
FJ6K0Z1_console> show version
Machine Description............... Dell Networking Switch
System Model ID................... N3024P
Machine Type...................... Dell Networking N3024P
Serial Number..................... CN0C3M5M282984CE0129A02
Manufacturer...................... 0xbc00
Burned In MAC Address............. f8:b1:56:67:99:91
SOC Version....................... BCM56342_A0
HW Version........................ 5
CPLD Version...................... 13
unit active backup current-active next-active
---- ----------- ----------- -------------- --------------
1 8.10.2.0 6.1.0.6 8.10.2.0 8.10.2.0
system top level command
Displays information available under the system top level command.
Examples
FJ6K0Z1_console> system
system <subcommand>
possible subcommands:
asset-tag set the switch asset tag
clock set the system clock
locate locate a switch by LED blinking
system asset-tag command
Allows the user to configure an asset tag for the switch in the switch configuration.
Examples
FJ6K0Z1_console> system asset-tag
system asset-tag <asset tag>
Set the switch asset tag. The asset tag is a customer configurable string
that is up to 16 characters long.
FJ6K0Z1_console> system asset-tag 12345
FJ6K0Z1_console> show system
System Description: Dell Networking N3024P
Burned in MAC Address: f8:b1:56:67:99:91
System Model ID: N3024P
Machine Type: Dell Networking N3024P
Serial Number: CN0C3M5M282984CE0129A02
Service Tag: FJ6K0Z1
Asset Tag: 12345