Deployment Guide

73
show backup-config command
Shows the data stored in the backup configuration
Examples
FJ6K0Z1_console> show backup-config
{
"Default Logging":
{
"components":
{
"API": true,
"Mapping": true,
"OFDB": true,
"datapath": true
},
"level": 1
},
"Management Interface":
{
"dhcp": true,
"ip address": "",
"ip gateway": ""
},
"OpenFlow Controller":
{
"connection max retries": 0,
"connection retry interval": 2000,
"enabled": true,
"ip address": "198.18.3.201",
"ip port": 6633,
"periodic echo ms": 10000,
"priority": 0,
"protocol version": "OpenFlow 1.3.4",
"reset echo count": 3,
"tls": false
},
"Password Hash": "dWAj3KHZgdo",
"Remote Syslog":
{
"enabled": true,
"ip address": "172.25.2.51",
"ip port": 514
},
"SSH Service":
{
"enabled": true
},
"Telnet Service":
{
"enabled": true
}
}
show bootvar command
Displays the environment variables that the system is set up to use in the boot loader when it starts up.
Note that similar information can be retrieved from the “show version” platform CLI command.
Examples
FJ6K0Z1_console> show bootvar
Images currently available in Flash
unit active backup current-active next-active
---- ----------- ----------- -------------- --------------
1 8.10.2.0 6.1.0.6 8.10.2.0 8.10.2.0