Deployment Guide

72
set openflow controller <ip address> <ip port>
Use the set openflow controller command to point the DNOS-OF switch to where the controller it is
supposed to connect to resides.
Examples
FJ6K0Z1_console> set openflow controller 172.25.11.93 6633
08-07 22:00:22.036504 ofconnectionmanager: INFO: cxn 172.25.11.93:6633: DISCONNECTED
08-07 22:00:22.078219 ofconnectionmanager: INFO: cxn 172.25.11.93:6633: CONNECTING->HANDSHAKE_COMPLETE
set password command
Use the set password command to change the password stored in the running configuration and used to
authenticate SSH sessions.
Examples
FJ6K0Z1_console> set password
Enter password: 123456
show subcommand
Lists the subcommands that are available for the show command.
Examples
FJ6K0Z1_console> show
show <subcommand>
possible subcommands:
backup-config display the backup configuration file
bootvar display system software boot settings
clock show current time of day
crypto show system crypto information
interfaces show system interfaces information
ip show system ip information
logging show logging information
memory show system memory information
openflow show system openflow information
power show poe power information
process show system process information
running-config show the running configuration
startup-config display the startup configuration file
statistics show system statistics information
switch show switch information
system show system information
tech-support print the output of multiple show commands
version display system hardware and software versions