Quick Reference Guide

Command Groups 98
Ethernet Configuration
show mail-server Displays the configuration of all the mail servers
or a particular mail server.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 87.
Command Description Mode
a
clear counters Clears statistics on an interface. PE
description Adds a description to an interface. IC
flowcontrol receive Configures the flow control on a given interface. GC,
IC
interface Enters the interface configuration mode to
configure parameters for an interface.
GC or
IC
interface range Enters the interface configuration mode to
execute a command on multiple ports at the
same time.
GC,
IC, IR
monitor capture (Global
Configuration)
Captures packets transmitted or received from
the CPU.
GC
monitor capture (Privileged
Exec)
Capture packets transmitted or received from
the CPU
PE
rate-limit cpu
Sets the maximum transmission unit on an
interface by adjusting the maximum size of
received Ethernet frames.
IC
rate-limit cpu Reduces the amount of unknown
unicast/multicast packets forwarded to the
CPU.
GC
show interfaces advertise Displays information about auto negotiation
advertisement.
PE
show interfaces
configuration
Displays the configuration for all configured
interfaces.
UE
show interfaces counters Displays traffic seen by the physical interface. UE
show interfaces description Displays the description for all configured
interfaces.
UE
Command Description Mode
a
2CSNXXX_SWUM200.book Page 98 Tuesday, December 10, 2013 1:22 PM