Quick Reference Guide

802.1x Commands 871
Example
console#show dot1x interface gigabitethernet 1/0/10
Administrative Mode............... Disabled
Dynamic VLAN Creation Mode........ Disabled
Monitor Mode...................... Disabled
Port Admin Oper Reauth Reauth
Mode Mode Control Period
------- ------------------ ------------ -------- ----------
Gi1/0/10 auto N/A FALSE 3600
Quiet Period................................... 60
Transmit Period................................ 30
Maximum Requests............................... 2
Max Users...................................... 16
VLAN Assigned..................................
Supplicant Timeout............................. 30
Guest-vlan Timeout............................. 30
Server Timeout (secs).......................... 30
MAB mode (configured).......................... Disabled
MAB mode (operational)......................... Disabled
Authenticator PAE State........................ Initialize
Backend Authentication State................... Initialize
show dot1x interface statistics
Use the show dot1x interface statistics command in Privileged EXEC mode
to display 802.1x statistics for the specified interface.
Syntax
show dot1x interface {gigabitethernet unit/slot/port| tengigabitethernet
unit/slot/port | fortygigabitethernet unit/slot/port} statistics
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
2CSNXXX_SWUM200.book Page 871 Tuesday, December 10, 2013 1:22 PM