Quick Reference Guide

802.1x Commands 867
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
The following table explains the output parameters.
Example
console#show dot1x authentication-history all detail
Time Stamp............................... Mar 22 2010 01:16:31
Interface................................ Gi1/0/2
MAC-Address.............................. 00:01:02:03:04:05
VLAN Assigned............................ 111
VLAN Assigned Reason..................... Guest VLAN
Auth Status.............................. Authorized
Reason...... ............................ Dot1x Authentication
due to Guest VLAN
Timer Expiry.
......
......
console#show dot1x authentication-history all
Time Stamp Interface MAC-Address VLANID Auth Status
Parameter Description
Time Stamp Exact time at which the event occurs.
Interface Physical Port on which the event occurs.
MAC-Address Supplicant/Client MAC Address
VLAN assigned VLAN assigned to the client/port on authentication.
VLAN assigned
Reason
Type of VLAN ID assigned i.e Guest VLAN, Unauth,
Default, Radius Assigned or Monitor Mode VLAN ID.
Auth Status Authentication Status
Reason Actual reason behind the successful or failure authentication.
2CSNXXX_SWUM200.book Page 867 Tuesday, December 10, 2013 1:22 PM