Quick Reference Guide

866 802.1x Commands
Example
console(config-if-Gi1/0/1)#show dot1x
Administrative Mode............... Disabled
Dynamic VLAN Creation Mode........ Disabled
VLAN Assignment Mode.............. Disabled
Monitor Mode...................... Disabled
EAPOL Flood Mode.................. Disabled
Port Admin Mode Oper Mode Reauth Reauth
Control Period
--------- ------------------ ------------ -------- ----------
Gi1/0/1 auto N/A FALSE 3600
Gi1/0/2 auto N/A FALSE 3600
Gi1/0/3 auto N/A FALSE 3600
show dot1x authentication-history
Use the show dot1x authentication-history command in Privileged EXEC
mode to display the dot1x authentication events and information during
successful and unsuccessful dot1x authentication processes. The command is
available to display all events, or events per interface, or only failure
authentication events in summary or in detail.
Syntax
show dot1x authentication-history { interface-id | all} [failed-auth-only]
[detail]
• interface-id— Any valid interface. See Interface Naming Conventions for
interface representation.
• all—All interfaces.
Monitor Mode Indicates whether the Dot1x Monitor mode on the switch is
enabled or disabled.
Dynamic VLAN
Creation Mode
Indicates if VLANs assigned by the RADIUS server are
dynamically created by the dot1x client.
EAPOL flood mode Indicates whether EAPOL frames are flooded on the interface
or are processed locally by the switch.
Field Description
2CSNXXX_SWUM200.book Page 866 Tuesday, December 10, 2013 1:22 PM