Quick Reference Guide

802.1x Commands 865
Mab attempts................................... 0
Mab failed attempts............................ 0
Captive-portal attempts........................ 0
Captive-Portal failed attempts................. 0
show dot1x
Use the show dot1x command in Privileged EXEC mode to display:
• A summary of the global dot1x configuration.
• Summary information of the dot1x configuration for a specified port or all
ports.
• Detailed dot1x configuration for a specified port
• Dot1x statistics for a specified port, depending on the tokens used.
Syntax
show dot1x [interface interface-id [statistics]]
• interface-id —Any valid interface. See Interface Naming Conventions for
interface representation.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
If you do not use the optional parameters, the command displays the global
dot1x mode and the VLAN Assignment mode.
Field Description
Administrative
Mode
Indicates whether authentication control on the switch is
enabled or disabled.
VLAN Assignment
Mode
Indicates whether assignment of an authorized port to a
RADIUS assigned VLAN is allowed (enabled) or not (disabled).
2CSNXXX_SWUM200.book Page 865 Tuesday, December 10, 2013 1:22 PM