Quick Reference Guide

802.1x Commands 863
Command Modes
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
console# show authentication
Tiered Authentication.......................... Enabled
console# show authentication interface Gi1/0/1
Port........................................... Gi1/0/1
Authentication Restart timer................... 300
Configured method order........................ dot1x mab captive-portal
Enabled method order........................... dot1x mab undefined
Configured method priority..................... undefined undefined
undefined
Enabled method priority........................ undefined undefined
undefined
Number of authenticated clients................ 1
Logical Interface.............................. 0
client mac addr:............................... 00:00:00:00:00:01
Authenticated Method:.......................... dot1x
Auth State..................................... success
Auth Status.................................... Authenticated
show authenticaton authentication-history
Use this command to display the authentication history on one or more
interfaces.
Syntax
show authentication authentication-history { interface-id | all}
• interface-id —Any physical interface.
Default Configuration
There is no default configuration for this command.
2CSNXXX_SWUM200.book Page 863 Tuesday, December 10, 2013 1:22 PM