Quick Reference Guide

802.1x Commands 853
Example
The following example enables 802.1x globally.
console(config)# dot1x system-auth-control
dot1x system-auth-control monitor
Use the dot1x system-auth-control monitor command in Global
Configuration mode to enable 802.1x monitor mode globally. To disable this
function, use the no form of this command.
Syntax
dot1x system-auth-control monitor
no dot1x system-auth-control monitor
Default Configuration
Dot1x monitor mode is disabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables 802.1x globally.
console(config)# dot1x system-auth-control monitor
dot1x timeout guest-vlan-period
Use the dot1x timeout guest-vlan-period command in Interface
Configuration mode to set the number of seconds that the switch waits
before authorizing the client if the client is a dot1x unaware client. Use the
no form of the command to return the timeout to the default value.
2CSNXXX_SWUM200.book Page 853 Tuesday, December 10, 2013 1:22 PM