Quick Reference Guide

832 VLAN Commands
private-vlan
Use the private-vlan command in VLAN Configuration mode to define a
private VLAN association between the primary and secondary VLANs.
Use the no form of the command to remove the private VLAN association.
Syntax
private-vlan {primary|isolated|community|association [add|remove] vlan-
list
}
no private-vlan [association]
• association —Defines an association between the primary VLAN and
secondary VLANs.
•
primary —Specify that the selected VLAN is the primary VLAN.
•
community —Specify that the selected VLAN is the community VLAN.
•
isolated —Specify that the selected VLAN is the isolated VLAN.
•
add —Associates a secondary VLAN with the primary VLAN.
•
remove —Deletes the secondary VLAN association with the primary
VLAN.
•
vlan-list —A list of secondary VLAN ids to be mapped to a primary VLAN.
The VLAN list can contain multiple entries separated by commas and
containing no spaces. Each entry can be a single VLAN id or a hyphenated
range of VLANs.
Default Configuration
This command has no default setting.
Command Mode
VLAN Configuration mode
User Guidelines
A community VLAN carries traffic among community ports and from
community ports to the promiscuous ports on the corresponding primary
VLAN.
2CSNXXX_SWUM200.book Page 832 Tuesday, December 10, 2013 1:22 PM