Quick Reference Guide

VLAN Commands 807
Example
The following example shows how to display all interfaces for Double VLAN
Tu n n e l i n g .
console#show dvlan-tunnel
Interfaces Enabled for DVLAN Tunneling......... 1/0/1
show dvlan-tunnel interface
Use the show dvlan-tunnel interface command in Privileged EXEC mode to
display detailed information about Double VLAN Tunneling for the specified
interface or all interfaces.
Syntax
show dvlan-tunnel interface {gigabithethernet unit/slot/port |
tengigabitethernet unit/slot/port | fortygigabitethernet unit/slot/port| all}
• all — Displays information for all interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
The following table describes the significant fields shown in the example.
Field Description
Mode This field specifies the administrative mode through which
Double VLAN Tunneling can be enabled or disabled. The default
value for this field is
disabled .
Interface Interface Number.
2CSNXXX_SWUM200.book Page 807 Tuesday, December 10, 2013 1:22 PM