Quick Reference Guide

718 RADIUS Commands
retransmit
Use the retransmit command in Radius mode to specify the number of times
the Radius client retransmits requests to the Radius server.
Syntax
retransmit retries
• retries — Specifies the retransmit value. (Range: 1-10 attempts)
Default Configuration
The default number for attempts is 3.
Command Mode
Radius mode
User Guidelines
User must enter the mode corresponding to a specific Radius server before
executing this command.
Example
The following example of the retransmit command specifies five retries.
console(config)#radius-server host 192.143.120.123
console(config-radius)#retransmit 5
show aaa servers
Use the show aaa servers command to display the list of configured RADIUS
servers and the values configured for the global parameters of the RADIUS
client.
Syntax
show aaa servers [accounting | authentication] [name [ servername ]]
• accounting —This optional parameter will cause accounting servers to be
displayed.
2CSNXXX_SWUM200.book Page 718 Tuesday, December 10, 2013 1:22 PM