Quick Reference Guide

RADIUS Commands 715
radius-server key encrypted
Use the radius-server key encrypted command to set the authentication and
encryption key for the communication between the switch and radius server.
Use the no form of the command to disable the key.
Syntax
radius-server key encrypted key-string
• key-string — The key string in encrypted form. It should be 256 characters
in length.
Default Configuration
There is no default configuration for this command.
Command Modes
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config)# radius-server key encrypted
f6fdffe48c908deb0f4c3bd36c032e72f6fdffe48c908deb0f4c3bd36c032e72f6fdffe48c90
8deb0f4c3bd36c032e72f6fdffe48c908deb0f4c3bd36c032e72f6fdffe48c908deb0f4c3bd3
6c032e72f6fdffe48c908deb0f4c3bd36c032e72f6fdffe48c908deb0f4c3bd36c032e72f6fd
ffe48c908deb0f4c3bd36c032e72
console(config)#
radius-server retransmit
Use the radius-server retransmit command in Global Configuration mode to
specify the number of times the Radius client will retransmit requests to the
Radius server. To reset the default configuration, use the no form of this
command.
Syntax
radius-server retransmit retries
2CSNXXX_SWUM200.book Page 715 Tuesday, December 10, 2013 1:22 PM