Quick Reference Guide

710 RADIUS Commands
to communicate with the primary server for any reason, it uses the backup
servers configured with the same server name. These backup servers are
identified as the “Secondary” type.
Syntax
primary
Default Configuration
There is no primary authentication server by default.
Command Mode
Radius mode
User Guidelines
There are no user guidelines for this command.
Example
console(Config-auth-radius)#primary
priority
Use the priority command in Radius mode to specify the order in which the
servers are to be used, with 0 being the highest priority.
Syntax
priority priority
• priority — Sets server priority level. (Range 0-65535)
Default Configuration
The default priority is 0.
Command Mode
Radius mode
2CSNXXX_SWUM200.book Page 710 Tuesday, December 10, 2013 1:22 PM