Quick Reference Guide

692 QoS Commands
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the DiffServ information.
console#show policy-map
Policy Name Policy Type Class Members
----------- ----------- -------------
POLY1 xxx DellClass
DELL xxx DellClass
show policy-map interface
Use the show policy-map interface command in Privileged EXEC mode to
display policy-oriented statistics information for the specified interface.
Syntax
show policy-map interface {gigabithethernet unit/slot/port|
tengigabitethernet unit/slot/port
| fortygigabitethernet unit/slot/port port-
channel
port-channel number } {in|out}
• port-channel number —A valid port-channel identifier.
•
in —Show inbound service policies. The offered value indicates the
number of packets received by the classifier.
•
out —Show outbound service policies. The discarded value indicates the
number of packets discarded by the policy.
Default Configuration
This command has no default configuration.
2CSNXXX_SWUM200.book Page 692 Tuesday, December 10, 2013 1:22 PM